The people currently used in daily life are also more, Pin Mill Machine for poly, is smashed into standard size, usually smashed into micrometers, usually our equipment is With multiple devices, it is usually composed of coarse, fine powder, or a wind device or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
Pin Mill MACHINE for poly as the high-pressure air flow of pulverization kinetic energy into a crushing cavity peripheral, the airflow distribution station, the airflow passes through the Raval nozzle accelerated ultrasonic speed air flow into the crushing room, The material and the venturi nozzle enters the crushing chamber synchronous accelerated grind.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.
ALPA Graphite Pin Mill Machine for Poly Case Sharing: This customer is a research institution, in the process of research, the graphite needs to be superfined. Through multiple incoming experiments, we have chosen our AlPa Pin Mill Machine for Poly.
Finished granularity: D50: 10-30μm
Production capacity: 30-50kg
The daily maintenance of Pin Mill Machine for Poly is a very important part, Here is the maintenance method of PIN MILL MACHINE for POLY.
2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
ALPAPin Mill Machine for Poly is a hard-quality device, supports according to demand, equipment models, high efficiency, low energy consumption, easy operation, 24 hours can consult!
