Rotor Mill Machine for Methyl Propyl Cellulose can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also to promote after-sales service service for customers, service attitude [123 ]
A Rotor Mill Machine for Methyl Propyl Cellulose costs, if you want to use Rotor Mill Machine for Methyl Propyl Cellulose for a long time, please pay attention to the following:
1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. 5.Rotor Mill Machine for Methyl Propyl Cellulose Host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point introduction to the daily maintenance of Rotor Mill Machine for Methyl Propyl Mill Machine for Methyl Propyl Mill Machine for Methyl Propyl Cellulose.
AlPa Phenolic Resin Rotor Mill Machine for Methyl Propyl Cellulose Share: The company has a manufacturer of phenolic resin in its customers. The company finds a lot of powder equipment companies. There is no suitable device. Finally, we found our AlPa. After the experiment, our company's product Rotor Mill Machine for Methyl Propyl Cellulose.
Technical parameters:
Product size: D50 less than 5μm
Production capacity: greater than 50kg / h
1,The pulverizer runs around each week, it needs to be stopped, check whether the filter dust is blocked, cleaned the filter dusting film.
2, the bearing is marked, and the high temperature butter is added regularly, and the bearing is lubricated and maintained.
3, before the production, the air machine operation, check if there is any abnormal noise under the equipment, every two months, the stop inspection is loose.
4, before each shift is parked, the air machine is loaded, and all the materials of the cavity are all discharged.
The Rotor Mill Machine for Methyl Propyl Cellulose, which has been approved by the Shan dong alpa device, has been well received by the customer.The reason is that Alpa's Rotor Mill Machine for Methyl Propyl Cellulose, grading precision, high technology; excellent quality, first-class service.Many customers are also repurchased, Shandong Alpa's Rotor Mill Machine for Methyl Propyl Cellulose devices must be your non-bilaterability.
