Hammer Pulverizer for Organic Anhydride

Environmentally friendly Hammer Pulverizer for Organic Anhydride has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the machinery processing industry in the stage has gradually replaced the traditional rough mechanical processing. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

Hammer Pulverizer for Organic AnhyDride is convenient, easy to maintain, and has a high grinding speed in the same product. At the same time, low energy consumption is the lowest in similar products. Products having the same particle size do not have functional, flammability, explosive, and oxidative materials that have particulate formation and particle dispersion, and oxidative materials can be used as a medium to achieve a closed pulverization and inertia. The loss of use of sex gas circulation is low. Negative pressure production can effectively reduce dust pollution, improve the working environment, compact structure, and seamless welding technology internally, which is easy to mechanically maintain and mechanically cleaning.

Since the high pressure gas is ejected from the nozzle, the gas stream causes the animal material to collide, shear, and friction, thereby achieving the crushing effect. Since the gas and the high speed of the animal material have a large centrifugal force. Under the effort of galvance, the crude particles were sent to the crushing room for multiple comminution, and the fine powder was discharged from the center exit.

ALPA carbonate Hammer Pulverizer for Organic Anhydride case Share: This customer is a company produced, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, found in the process of selling carbonate, found The current customer needs is ultrafine powder of lithium carbonate, so it upgraded the production line of lithium carbonate, purchased many of our AlPa's multiple Hammer Pulverizer for Organic Anhydride.

Technical parameters:
finished particle size: D50: 5-8μm
Production capacity: 450kg

Hammer Pulverizer for Organic AnhyDride's daily maintenance

1, during production, The temperature rise of the bearing must be checked frequently, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the grading flow bearing are fat lubrication, using special fat, degree 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwiseThe bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Welcome everyone to inquire!