In numerous crushing mode, Pin Mill Machine for Lithium Iron Phosphate has become one of the most mainstream pulverization techniques in a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular, it is suitable for disinfection of materials such as pulverization drugs.
Pin Mill MACHINE for Lithium Iron Phosphate works mainly after the material accelerates through the nozzle, and the compressed air enters the flow of the crushing area, and the material is fluidized, each particle has the same Motion status. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.
ALPA Carbon PIN MILL MACHINE for Lithium Iron Phosphate Share: The company produces superfine and super fine pulveruts in the production of static pressure graphite. After multi-party examinations and experiments, finally selected our AlPA as a cooperative customer, we provided the Pin Mill Machine for Lithium Iron Phosphate provided by it to meet its need for carbon pulverity, particle size range, yield and other needs. Technical parameters:
finished particle size: D65: 200 目
Production capacity: 800-1000kg
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer
(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown is: inverter - feeder - main air valve compressor - compressorLeaf wheel motor - cyclone material, dust removal switch - fan - universal power supply air compressor.
4, eddy current pulverizer maintenance and maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions
(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
Welcome everyone chooses Shan Dong Alpa, the company is committed to the product and service of the airflow crusher. Our company provides Pin Mill Machine for Lithium Iron Phosphate, the price is low if you are for our Pin Mill Machine for Lithium Iron Phosphate is interested, please feel free to contact us.
