Vibration Mill Machine of Hydroxy Iron Powder is mainly used by the pulverization mechanism to determine its scope, high finished product and improvement, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food , Health products, new materials and other industries.
In the production process, Vibration Mill Machine of Hydroxy Iron Powder mainly uses the freezing, filtration, and drying of the compressed air, forming a supersonic air air flow through the nozzle inside the device. After a powerful pressure rotation into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.
ALPA Gypsum Vibration Mill Machine of Hydroxy Iron Powder case Share: The company is a more well-known non-metallic mine enterprise in South Africa. The company's main product is a super fine ultra-fine powder of non-metallic mine such as stone and gypsum. The company learned our equipment through our website and saw our case. Finally, I finally chose to buy our company's Vibration Mill Machine of Hydroxy Iron Powder as its gypsum ultrafine powder production line.
Technical parameters:
finished particle size: D97: 5UM
Production capacity: 140kg
Daily maintenance for Vibration Mill Machine of Hydroxy Iron Powder
1, during production, The temperature rise of the bearing must be checked frequently, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
If you have something about other crushers, you want to know, welcome to consult!
