Due to the wide application of PIN Pulverizer for Nickel Carbonyl Powder, the research and development of classifying machines at home and abroad attaches great importance to. In the current market, there is a great development space.
PIN Pulverizer for Nickel Carbonyl Powder is suitable for crushing machinery of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed, such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus generated high-frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer is almost no increase in the temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean and maintenance. General shells use water cooling and their own air volume, conveying crushing materials, improves temperature, and reduces thermal materials.
The wear of the blade is caused by the vibration of a large number of ultrasonic eddy currents and high frequency pressures generated by the blade. Compact, no dust, no dust.
ALPA Graphite Pin Pulverizer for Nickel Carbonyl Powder case Share: This customer is a research institution, in its research, the graphite needs to be superfined. Through multiple incoming experiments, we finally chose our Alpa Pin Pulverizer for Nickel Carbonyl Powder.
Technical parameters:
Production capacity: 30-50kg
Daily maintenance of PULverizer for Nickel Carbonyl Powder
1, production In the process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 (episode) or 3/4 (lower test) of the space in the bearing cavity.It can be filld by too much to fill in the grease may cause too much bearing temperature too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
If you have something about other crushers, you want to know, welcome to consult!
