With the development of society, the application of Vibration Pulverizer of Exhaust Gas DesulFurization has become more large.
VIBRATION PULVERIZER OF EXHAUST GAS DESULFURIZATION The temperature will rise, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
Technical parameters:
Production capacity: 2T +/- 10%
1. Low powder temperature: no cooling system during continuous operation, the powder temperature generated Never less than 50 degrees;
2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%; 123]
3. Can be cleverly pulverized by adding water, alcohol or other liquid, or protective crushing by introducing gas;
After understanding the characteristics of the ultrafine pulverizer, when you slightly When you purchase, you should pay more attention to it, then you will choose your satisfactory super fine pulverizer.
The above is the Vibration Pulverize brought to everyone.R of Exhaust Gas DesulFurization uses matters, you want to know more about other crushers, you can pay more attention to us!