Hammer Pulverizer of Nimodipine is a very common and common pulverizer. It has a wide range of applications involving many industries.
The crushing product is in addition to the particle size, and the particle size distribution is narrow, the particle name is smooth, the particle shape is high, and the high activity is high, the dispersibility is good.
ALPA cobaltate Hammer Pulverizer of Nimodipine case Sharing: Beijing Lithium Electric Materials Company purchased a Hammer Pulverizer of Nimodipine from our Alpa in 2020. Ultrafine pulverizer for lithium cobaltate, the company has three particle size requirements for lithium cobaltate, requires a device to be simultaneously satisfied. For the company's unique needs, our ALPA engineers have been working hard to customize a Hammer Pulverizer of Nimodipine. The pulverizer can meet the production requirements of multiple particle size sections, equipped with subsequent airflow classifier systems, and can be sorted by different particle size products.
Technical parameters:
Finished particle size: lithium cobaltate small particles D50: 3-6 μm; lithium cobaltate large particles: 50: 8-20 μm; Trimetimeterials D50: 6-13μm;
Production capacity: Lithium cobaltate small particles: 250 kg of cobalt acid lithium large particles: 500KG ternary: 500kg
1, when crusher homework, operator should stand The tangent direction of the hammer rotates, is not allowed to wear gloves, and the hand does not exceed the safety line, and it is not allowed to use the iron and sticks instead of hand feed.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7, work in workAt any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
Shan Dong Alpa is committed to Hammer Pulverizer of Nimodipine, has a mature process, strong technical strength, professional engraving development, survive by quality, welcome everyone to come to consult.
