People currently use in daily life are also more, Pin Mill Machine of Calcium Fluoride is smashed into standard size, usually smashed into micrometers, usually our equipment There are multiple devices to consist, usually composed of a part of a coarse, fine powder or a wind device, etc. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.
Pin Mill MACHINE OF CALCIUM Fluoride works mainly after the material accelerates into supersonic flow through the nozzle, the compressed air enters the flow of the crushing area, and the material is fluidized, each particle has the same movement. state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.
ALPA Chemical Material Powder Pin Mill Machine of Calcium Fluoride Case Sharing:
A mechanical company is a research and development, manufacturing, manufacturing of solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment, etc. High-tech enterprise.
With complete, scientific quality management system and powerful R \u0026 D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour yield: Sylect efficiency 60-90%
Pin Mill Machine of Calcium fluoride is widely used, you know how to correct Use it? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor power, open totalThe power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
The superfine grade machine produced by AlPa can be produced simultaneously for multiple particle size products. Welcome new and old customers to come to consult!
