Most of the product production and processing in the current stage use Rod Pin Pulverizer for Lithium Hydroxide's smashing is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.
Rod Pin Pulverizer for Lithium Hydroxide is smashing under full-closed state, the fineness of the pulverized particles is better, the granular shape is good, the output is also large, the pulverization process is no dust production, and the material is purity after crushing, greatly saved. Raw materials. Rod Pin Pulverizer for Lithium Hydroxide can reach the effect of cell broken walls during the pulverization, so that the effective component dissolution of the medicinal material is greatly improved, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.AlPA lysis Carbon Black Rod Pin Pulverizer for Lithium Hydroxide Case Sharing: The company is a renewable energy application company in Inner Mongolia. When the company recovers the waste tire, the ultrafine pulverized equipment needs to be used. Cracking carbon black for ultrafine pulverization. After many incidents, our Alpa's Rod Pin Pulverizer for Lithium Hydroxide was selected.
Technical parameters:
Finished granularity: D90: 500 目
Production capacity: 2T
1, need to boot Check if the lubrication is oil.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.
Shandong AlPa is a company with research and development of 20 years of gas flow. After years of precipitation and accumulation, experienced and has multiple patents. Inferent airflowFor so many years, the mill has provided Ten million equipment for domestic and foreign customers, and there will often come to customers to order our products again, enough to explain the reputation of the Shandong Alpa airflow mill.Welcome to inquire!
