With the continuous increase in social needs, Turbo Pulverizer with Lactose continues to improve in the use of performance, finished product quality, service life, etc., very good to process raw materials into micrometers or even nanoscale fine powder, and are already chemical, Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.
Turbo Pulverizer with Lactose Technology's design and manufacturing is a core job.
There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.
The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
ALPA Chemical Pigments Turbo Pulverizer With Lactose Share: The company is a professional company that specializes in high-performance organic pigments. In its production process, pigment ultrafine pulverization equipment is required. The company's ultrafine crushing equipment is from our AlPa, which uses our company's Turbo Pulverizer with Lactose.
Technical parameters:
finished particle size: 10-45μm
Production capacity: 300kg
Turbo Pulverizer with Lactose?
before power on, the connection site, Seal and lines, etc.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
For more consultation, please continue to pay attention to us, or inquire.
