With the continuous increase in social needs, Impact Mill Machine with Date is constantly improving in terms of performance, finished product quality, service life, etc., very well, which is well processed into micrometers or even nanoscale fine powder, and it has also been chemical. , Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.
In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. The operational rules of Impact Mill Machine with Date are as follows: Prepare materials before the preparation of the production order is received. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, the startup of the Impact Mill Machine with Date first starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures for the close and inspection of Impact Mill Machine with Date are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.
AlPA Silica Powder Impact Mill Machine with Date Case Sharing:
A new energy company is a high-tech enterprise focusing on high performance lithium battery materials, and the company's main business areas involve R \u0026 D, production and sales of battery materials and development and technology transfer of battery technology.
Case parameters:
Product particle size: go to 3UM fine powder
Hour yield: 150kg
Impact Mill MacHine with Date should be maintained and maintained
1. Before using, check the equipment all standard parts is tightened, the belt is not tightened.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.
If the later period is intended for ultra-fine classifiers, precision grading machines, jet grading machines, you can directly contact us, product quality is guaranteed, prices are fair, good service, welcome everyone to buy!
