Turbo Mill Machine with Boron Carbide can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also to promote after-sales maintenance service for customers, service attitude
Airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve a classification of different particle sizes. Turbo Mill Machine With Boron Carbide can be divided into static classifiers and dynamic classifiers based on whether there is moving parts. Turbo Mill Machine With Boron Carbide has become better and better. Many industries need to control the particle size of fine powder.
ALPA crystal sorbitol Turbo Mill Machine with Boron Carbide case share: Taiwan's cosmetics companies need a large amount of crystal sorbitol, through our company, the agent of Alpa, learned that our company can crush The equipment is customized. After many incident experiments. Finally purchased a Turbo Mill Machine with Boron Carbide of our company.
Technical parameters:
Finished granularity: 10-200 目
Production capacity: 10T
Let's talk about Turbo Mill Machine With Boron Carbide's common fault exclude.
Turbo Mill Machine with Boron Carbide Troubleshooting:
1, feedback: Improper wind doors, pipeline blockage, screen blocked, dust bag gas permeability or severe wear, hammer surface wear is serious Waiting, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, the machine should immediately stop the damaged componentsOr remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
