Rod Pin Grinder With Metronidazole as a clean, efficient, high-level, high-yield of advanced crusher model in the pulverization of Western medicine raw materials, and test from a few triggered microsteration At the time of hundreds of tons of large production, gas flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermistory drug; good sealable, low pollution; Easy to operate; crushing-mixed-dry online operations, etc. have been widely recognized by the company.
High-temperature Rod Pin Grinder with Metronidazole performance characteristics:
1, the contents of the vertical classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.
ALPA Tieni Rod Pin Grinder With Metronidazole Experiment: Talcium grading machine is an apparatus that is often used in talc production, and our AlPA classifier has excellent performance, and there are many talcum powder production. Enterprises come to our company to conduct talc grading experiments. Product particle size: 230kg / h
In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to trigger the failure. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipomatic lubrication, using special lipids, the replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the interior space in the bearing cavity. Otherwise, It will cause too high of the bearing temperature. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. Lubricating oil used in this register, N32 alkaline high-z7-high-grade anti-motorThe irradiation, the deceleration machine 401 generally lubricates oil, and it is not necessary to use other machines.After four or five months, new oil should be replaced.
Shan Dong Alpa is committed to Rod Pin Grinder With Metronidazole, has a mature process process, the company has strong technical strength, specializing in crusher research, survive by quality, welcome everyone to come to consult.
