Hammer Mill for Antioxidant As the name referway is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good precision.
Hammer Mill for antioxidant work temperature will rise High, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titaniμm powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
A mining company specializes in the development and production of quartz sand, silicon fine powder,
company produces various models, quartz of various quality indicators Sand and water washing dry stone sand is widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision casting, furnace materials, refractory materials, ceramic glaze, ceramic billets, rubber, coating, etc., welcome to find, guide , Negotiate business!
Case parameters:
Product particle size: D100: 11.5μm
Hour Yield: 380kg
