In this economic thrive, there are many people who know the air current pulverizer, Turbo Mill for Anhydrous Glucose Mediμm technology is in a leading position in the same industry.
Turbo Mill for anhydrous glucose Mediμm increases temperature during work, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titaniμm powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
A mechanical company is a company engaged in the development and manufacturing of a single set of soldering wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment and other equipment High-tech enterprise.
With complete, scientific quality management system and powerful R & D team, and continuous improvement of product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: remove 20μm with fine powder
hour production: sorting efficiency 60-90%
