FL / ITC Single Classify Wheel Classifierxanthan GUM institution reasonable, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact structure, no dust overflow.
Let's take a look at how to extend the use of FL / ITC Single Classify Wheel Classifierxanthan Gum: 1. Strictly follow the operating procedures; 2. If the damaged parts should be paid to the time check, replace it in time. 3. The device body has no rotating components, not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our body part uses special material production, the use of the knife tip is at least more than one year, the knife tip is wear more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife tip; 4. It is recommended to use the long filter device to improve equipment stability, and ensure grading accurate.
In the production process, FL / ITC Single Classify Wheel Classifierxanthan GUM is widely used, how do you operate more secure? Very damage machine. 2. If the super-fine classifier is running, the operator does not stand in the range of rotation to avoid accidents. 3. Before working, the staff is in order to ensure its own safety, wear a predetermined work costume. 4, when the grading machine is added, do not hard to add the machine. 5. If the classifier begins, the staff should not leave and prevent problems. 6. If the ultrafine classifier is discovered, stop checking. 7. Do not open the cover or other actions before the classifier is not completely stopped, if you want to operate, you need to completely stop it.
