my country's overall development trend is the reverse development of low cost, high efficiency, strong power, strong dispersibility, quality and stable, etc., for various types of ultrafine pulverized equipment Higher technical requirements are put forward. FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH PLASTER Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high purity ultrafine powder is prepared by chemical synthesis, high cost is too high, very difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies, and its development also depends on the progress of the related technologies. Therefore, the main development trend of ultrafine crushing equipment has the following aspects to develop fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high processing skills. Integrated development of equipment and process research. Ultra-fine and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be adapted.
How to continue FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER WITH PLASTER life? Here are the following aspects: 1. In the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, the inspection should be checked, find a reason, and troubleshoot the fault. 2. When the new machine is running, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt. 3. Regularly check the lifting parts, promptly guarantee the quality of production and production. 4, blade and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick. 5, the host and gradient flow bearing oil grease lubrication, the use of special grease, and the degree of 265-295.6, and the change cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high. 7, the spiral feeder is 4,000 hours, plus ordinary calcium based grease.
