FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER FOR PEA Protein is suitable for microfinishing machines of synthetic resins, instrument chemistry, and other materials. It is different from the ordinary pulverizer. It is not only a simple crushing force such as impact strength and cutting force, but also subject to a large number of ultrasonic eddy currents generated by the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken under certain conditions and have viscous and elasticity. The raw material temperature of the machine increased, and the thermal material can also be broken.
Now let's talk about the exclusion of FL / ITC Multiple Classify Wheel Classifier for Pea Protein. FL / ITC MULTIPLE CLASSIFY WHEEL CLASSIFIER FOR PEA Protein Troubleshooting: 1, feed back: Improper tunnel adjustment, pipeline clogging, screen blocked, dust bag gas permeability or severe wear, hammer wear is serious, etc. can cause feed Recurns. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
ALPA studentsProduced superfine classifiers, graded units such as precision classifiers can be produced simultaneously for multiple particle size products. Welcome new and old customers to come to consult!
