Impact Crusher's use can be said to be important in the industrial production process at this stage, and AlPA has been committed to research and development and application of grading machines for many years, and we produced during many years of development. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.
Impact Crusher of Color Mixing is primarily used for more refined materials. The pulverized particle diameter is 1.5 to 0.005 mm, and the crude material is sieved. The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).
When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the raw material is sent to the gas stream into a pulverized device.
It is well known that the load of solid particles in air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.
The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.
In the rising airflow, the airflow speed required to suspend a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.
The impact crusher of color mixing has a wide range of unclear, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.
ALPA Quartz Powder Impact Crusher of Color Mixing Case Sharing:
A newMaterials company is a high-tech enterprise engaged in electronic grade silicon fine powder production and development. The company has a number of silicon micron powder production lines, annual production of crystalline silicon fine powder, molten silicon fine powder, surface treatment silicon fine powder and other specifications. The company has always adhered to customer-centric, luxuriant needs to respond quickly and continuous innovation, and is committed to becoming a supplier of leading powder materials applications in the industry.
We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for electronic materials, electrical insulation materials, special ceramics, precision castings, paint coatings, and other functional applications to create value for customers.
Product particle size: D97: 5-75UM
Horses Yield: 20-100kg
Installation, operation and maintenance is three important factors using Impact Crusher of Color Mixing. The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. Boot is a standard, for the first time to contact and use this kind of equipment, it is always a very strange state. In fact, it is very simple, the best way is to familiarize yourself with the consumer content on the instructions or have no use value. Timely specification and familiar. After each startup, check the airflow pulverizer in time to develop good usage habits. In the future, we don't need to pay attention to and familiarize.
The airflow pulverizer has improved and improved from the design and component combination, gave us a lot of help. It is good quality, but it is also declined for a long time without maintenance and maintenance. Check the operating components, electrical components, and transmission. Once an abnormality occurs, please repair it in time, without a fault, gas mill, prevent accidents.
