Turbo Mill of Clay as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests from several tens of micro tests to several hundred A few tons of large production, Turbo Mill of Clay With its narrow range of particle size distribution, the average particle size is fine; the powder has good shape, high product purity; suitable for low melting point, thermal drugs; good sealable, low pollution; Crushing - Mix - Dry Online Operation and other major characteristics have been widely recognized by the company.
When the Turbo Mill of Clay screen material, under the pressure of the rotating duct, the screen has good commonity. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.
AlPa Trimed Materials Turbo Mill of Clay Case Sharing: The company requires a three-dimensional material ultrafine pulverizer, and our ALPA Turbo Mill of Clay is also more well-known in the industry. There is a lot of proportion in the industry. Through experiments, the company purchased a Turbo Mill of Clay of our company.
Finished granularity: D50: 10μm
Production capacity: 5-10kg / h
Ultra-micro Turbo Mill of CLAY correct usage:
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3The phenomenon, whether the direction of rotation of the rotor is consistent with the direction of the arrow, whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
The Shan Dong Alpa is a scientific and technological private enterprise that produces a variety of airflow pulverities, integrating development, manufacturing, and application.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.
