Cell Pulverizer with packaging inkjet

The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.

Cell Pulverizer With Packaging Inkjet is based on the size of the powder particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.

The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.

ALPA calcium carbonate Cells Cell Pulverizer with Packaging Inkjet case Sharing: This customer is a stone powder company, mainly engaged in producing calcium carbonate, magnesium oxide and other companies, the company needs The calcium carbonate ultrafine powder is classified, and the product of the required particle size section is classified. After the experiment, as well as the production requirements, our AlPA's host can reach the company's needs, and finally purchased a plurality of graded units of our company.

Welcomes the major calcium carbonate flour manufacturers with powder grading to factory to visit and incurred.
Cell Pulverizer with packaging inkjet is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions to operate, minimize damage rate, then What is the precaution before using a jet ball mill? Here are some introductions.

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.

2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately,Check certain components.
ALPA is a manufacturer dedicated to powder grading machine, precision classifier, laboratory grade machine, and we have many years of production experience in the production of products, while we are in many mechanical products.It also achieved a lot of important breakthroughs, I believe it will be the primary choice for your product purchase.